The Renogy Wanderer-Li is a 30A PWM solar charge controller that integrates efficient PWM charging to increase battery life and improve system performance. Designed with a simple interface for ease of use, the controller uses multiple LED indicators to notify users of charge status and battery information. This newly improved model has two advanced features: an RS232 port and Lithium battery charging. With the addition of the RS232 port, users can now connect and communicate with the Renogy BT-1 Bluetooth module. By adding the BT-1 to the Wanderer-Li, you can now use the smartphone app, Renogy BT, to monitor and adjust your solar system remotely. With the inclusion of the Lithium Battery Mode, the 30A negative-ground controller is now capable of charging various 12V battery types and banks, including most 12V lithium models available on the market.
- Optimized for a 12V system; Deep cycle Sealed, Gel, Flooded, and Lithium battery option ready.
- Smart 4 Stage PWM charging (Bulk, Boost, Float, and Equalization) and temperature compensation increases battery life and improves system performance.
- Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current. Multiple LED indicators for easy to read charge status and battery information.
- Integrated RS232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app.
|The Renogy Wanderer Li 30A Negative PWM Charge Controller|
|Nominal Voltage: 12 VDC||Max. PV Input Power: 400W|
|Rated Charge Current: 30A||Max. PV Input Voltage: 25 VDC|
|Self-Consumption: <10mA||High Voltage Disconnect: 16V|
|Boost Duration: 120 min||Temperature Compensation: -3mV/°C/2V|
|Working Temperature: -20°F - 113°F||Storage Temperature: -31°F - 176°F|
|Max Gauge Size: Up to 8AWG||Weight: 0.65 lbs|
|Dimensions: 6.45 x 4.31 x 1.76 inches||Enclosure: IP20|
|Options: BT-1 Bluetooth Module|
|Model: BT-1||Input Voltage: 5V-12V|
|Standby Power Consumption: 0.04W||Operating Power Consumption: 0.05W|
|Communication Range: ≤15m||Serial Baud Rate: Fixed Baud Rate 9600bps|
|Cable Length: 5.00 m (16.4 ft)||Dimensions: 2.6 X 2.01 X 0.61 In|
|Installation Dimensions: 57.5, φ3.2mm (2.26, φ0.13in)||Operation Temperature: -20℃ to 75℃ (-4 F to 167 F)|
|Protection Grade: IP67||Weight: 120 g (4.2oz)|
|Accessories||1-year material warranty|
- Renogy Wanderer Li 30A PWM Charge Controller
- Options: BT-1 Bluetooth Module